Bimba IntelliSens Manual de usuario descargar pdf (Pagina 46)

IntelliSense

Manual

The IntelliSense

SIM also stores the Real Time Clock Data and Identication labels, congured by the user, as ASCII

data in the following registers:

Table 5: ASCII MODBUS Registries

Using IntelliSense

I/O Connector

The IntelliSense

SIM unit’s I/O connector can be used to power the SIM or to utilize the two 3-wire NPN transis-

tor outputs. These outputs are congured to indicate the EOT (End Of Travel) sensed by the IntelliSense

system.

Cable part number CBL-IS-CF-0.5 is used to connect to the I/O connector. This cable is 0.5 meter in length, has

ying leads on one end, and a 4 pin connector on the other (Figure 55: Molex 50-57-9409 connector). The underside

of this connector has an arrow to indicate the location of pin 1 (Figure 56: Underside of Molex connector with Pin 1

Indicator).

User may also purchase the 4 pin connector through a 3

party to wire for additional lengths as needed.

Figure 55: Molex 50-57-9409 connector

Figure 56: Underside of Molex connector with Pin 1 Indicator

40501 RTC Seconds 2 bytes

40502 RTC minutes 2 bytes

40503 RTC hours (24hr) 2 bytes

40504 RTC hours (12hr) 2 bytes

40505 RTC AM/PM 2 bytes

40506 RTC day 2 bytes

40507 RTC month 2 bytes

40508 RTC year (last 2 digits) 2 bytes

40510 ID 1 string 60 bytes

40540 ID 2 string 40 bytes

40560 Part number 30 bytes

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 67 68

Sin comentarios

Bimba IntelliSens Manual de usuario Pagina 46