Bimba IntelliSens Manual de usuario descargar pdf (Pagina 34)

IntelliSense

Manual

Using IntelliSense

Sensor Interface Module Lights

Boot load mode

If the SIM is connected to a Data Gateway or a PC running the IntelliSense

software when it

enters Boot load mode, the SIM will check if rmware update is available on the Gateway or

PC. While the SIM is checking for the latest rmware, Status 1 and Status 2 will be lit. After the

rmware update, the SIM will check that the installed rmware is valid. During this time, Status 1

will be lit. If the rmware fails, the check it will automatically restart the boot load process. If the

rmware fails a second time, Status 1, Status 2, and Status 3 will be lit. Go to bimba.com for the

latest rmware. When the check is successful, the SIM will enter Application mode.

Application Mode

Figure 41: Operation of Status Lights in Cylinder Monitoring Mode

Figure 42: Operation of Status Lights in Pressure/Temperature Monitoring Mode

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 67 68

Sin comentarios

Bimba IntelliSens Manual de usuario Pagina 34