Bimba STP-10 Manual de usuario descargar pdf (Pagina 6)

STP-10 Hardware Manual

Pin Assignments of the PC/MMI Port

(RJ11 connector)

ground (to PC ground)

TX (to PC RX)

No connection

RX (to PC TX)

Connecting to the PC using RS-232

• Locate your computer within 8 feet of the drive.

• If you have an Ethernet drive, this port is not used. All communcation uses the RJ45 Ethernet connector.

• RS-232 drives are shipped with a communication cable. Plug the large end into the serial port of your PC and the small end

into the PC/MMI jack on your drive. Secure the cable to the PC with the screws on the sides.

Never connect a drive to a telephone circuit. It uses the same connectors and cords as telephones and modems, but

the voltages are not compatible.

If your PC does not have a serial port, you should purchase a “USB Serial Converter”. We have had good results with the USB-

COM-CBL from byterunner.com. If you wish to use a different converter, it is recommended to use one that makes use of the FTDI

chipset to perform the actual conversion.

1 2 3 4 5 6 7 8 9 10 11 ... 38 39

Sin comentarios

Bimba STP-10 Manual de usuario Pagina 6