Bimba PFC-LRT Manual de usuario descargar pdf (Pagina 17)

Leaders in Actuation.

Bimba Manufacturing Company

Monee, IL 60449-0068

Telephone: 708.534.8544

Email: [email protected]

www.bimba.com

Rev Level: 0

To learn more about this

product, scan this QR code

with your mobile device.

The information presented is in Bimba’s best engineering opinion and should be used for reference only. Recommendations derived should be veriﬁed under

actual operating conditions. Bimba reserves the right to change speciﬁcations without prior notice.

By using the Continuous Cycle Mode of the controller, a continuous cycling process can be obtained.

The N.O. contact of Relay 1 is the only output necessary for cycling. The control potentiometers are

used for setting the inner and outer limits of the stroke. At each limit the cylinder will reverse direction and

move toward the other limit. This process will continue indeﬁnitely until interrupted.

FIGURE 16 illustrates Relay 1 operation and the ideal voltage output versus cylinder travel (seen at Ter-

minals 6 and 7). Control potentiometer 1 is used to set the inner limit (2") and control potentiometer 2 is

used to set the outer limit (9"). The cylinder will extend while the N.C. contact of Relay 1 is closed. When

the cylinder reaches the outer limit, the N.O. contact of Relay 1 will close. When this happens, power is

applied to the solenoid causing the cylinder to retract. When the inner limit is reached, the relay returns

to normal and the process repeats itself.

FIGURE 16

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23

Controller Manual 1
Leaders in Actuation 10

Comentarios a estos manuales

Sin comentarios

Bimba PFC-LRT Manual de usuario Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos de medición Bimba PFC-LRT